Use of UHF Channel 40
Submitted: Monday, Sep 18, 2006 at 11:23
ThreadID:
37801
Views:
14692
Replies:
10
FollowUps:
7
This Thread has been Archived
Wizard1
Came across a bizarre phenomenon yesterday while travelling on the M1 travelling north towards
Tweed Heads..no truckies on channel 40!
I was aware of a possible traffic hickup in
Tweed Heads, so seeing a couple of oncoming rigs gave them a call...no answer...tried again..nothing.
Hit scan and got some chattter on channel 27..truckies..called them and got the answer.
Maybe they have moved off 40 for some reason...
Wizard
Reply By: Craigww2 - Monday, Sep 18, 2006 at 11:52
Monday, Sep 18, 2006 at 11:52
Apparenty down
Gold Coast way they are on 27 and sometimes 29. Changes once you get up to
Brisbane back to 40
AnswerID:
195049
Reply By: Truckster (Vic) - Monday, Sep 18, 2006 at 11:59
Monday, Sep 18, 2006 at 11:59
Been that way for yrs up there.
AnswerID:
195051
Reply By: joc45 - Monday, Sep 18, 2006 at 11:59
Monday, Sep 18, 2006 at 11:59
Could be aliens high up above syphoning up all the RF signals on Ch40.
Has anyone reported strange sightings in the area recently?
AnswerID:
195052
Reply By: Member - Mike DID - Monday, Sep 18, 2006 at 12:04
Monday, Sep 18, 2006 at 12:04
Truckies use Ch40 all around Australia - except the North Coast of NSW.
AnswerID:
195056
Follow Up By: Member - Pezza (QLD) - Monday, Sep 18, 2006 at 22:06
Monday, Sep 18, 2006 at 22:06
Might want to change that statement Mike to
" Truckies use Ch40 all around Australia - except between
Brisbane and
Sydney along the Pacific Hwy. "
Avagoodn
Pezza
FollowupID:
453282
Reply By: Wizard1 - Monday, Sep 18, 2006 at 13:37
Monday, Sep 18, 2006 at 13:37
Thanks for
clearing that mystery up...wonder if other travellers are aware of that practice...
AnswerID:
195082
Reply By: Upstart - Monday, Sep 18, 2006 at 14:24
Monday, Sep 18, 2006 at 14:24
I'm fairly new to UHF use. What are all the other channels for?
Which channel do all of you use and why?
AnswerID:
195086
Follow Up By: Member - Andrew (QLD) - Tuesday, Sep 19, 2006 at 13:34
Tuesday, Sep 19, 2006 at 13:34
Check out the Communications sections in the "On the Road" section in the EO menu above.
An easy to understand section is covered in the Communications Equipment Review page.
Andrew
FollowupID:
453374
Reply By: wyrss - Monday, Sep 18, 2006 at 14:55
Monday, Sep 18, 2006 at 14:55
Channel 40 is great for those who want to use it correctly, unfortunately in every capitol city you have idiots making stupid repetative crap calls all day long which ruin it for genuine UHF users.I turn it down or switch it off.
People have to remember it is for the use of everyone as a service to the community, the last thing we need are these rabbits ( who's only achievement in life is buying a big aerial ) simply winding peoples emotions up every day trying to prove that they are the 'boss'of the airwaves.
righto, soapbox is packed up again
see ya'all
AnswerID:
195094
Follow Up By: Mr Fawlty - Monday, Sep 18, 2006 at 17:10
Monday, Sep 18, 2006 at 17:10
I agree with you wyrss, always gotta be some minority group of cretins who spoil it for everyone...
FollowupID:
453211
Reply By: ZUKSCOOTERX90(QLD-MEMBER) - Monday, Sep 18, 2006 at 16:01
Monday, Sep 18, 2006 at 16:01
I heard that the truckers use ch 29 from
gold coast to
sydney on the Pacific Hwy.
Cheer's Bob.
AnswerID:
195101
Follow Up By: Stu050 - Monday, Sep 18, 2006 at 17:10
Monday, Sep 18, 2006 at 17:10
Agree with Bob,
Channel 29 is the "road channel" for the Pacific Highway (don't know why)
Stu
FollowupID:
453210
Follow Up By: Member - Pezza (QLD) - Monday, Sep 18, 2006 at 22:02
Monday, Sep 18, 2006 at 22:02
2 reasons, first one is that before the pacific hwy was opened up to B-doubles they all used the
New England Hwy along with quite a few singles, in a lot of high spots you would pick up conversation from the
New England on the Pacific and vice versa, the UHF is used for more than just general chit chat by interstate drivers, quite a lot of it's use is safety orientated and the interference from the other hwy wasn't doing anyone any good so it was decided to use 29.
The second reason is that along the Pacific you travel through a lot of larger towns, hence there are more of the abovementioned " rabbits " than on a normal run of the same length, by using ch29 it keeps th truckies away from all the garbage these clowns carry on with thinking everyone is using 40.
This is the reason ch29 is not publicised, the less know about it the more peacefull it stays, so do all the truckies a favour and SSSSSSSHHHHHHHH !
Avagoodn
Pezza
FollowupID:
453281
Follow Up By: Wizard1 - Tuesday, Sep 19, 2006 at 11:52
Tuesday, Sep 19, 2006 at 11:52
Pezza,
I've travelled a lot of this country and can count on one hand the amount of discussions on channel 40 between truckies that were safety related, unless you regard advising of a police car or radar location as safety.
Most of their chit chat is nothing more than where someone is going or where they've been.
There are times when you pick up, by accident, an oversize escort advising other semis whichis handy so you can be prepared for them especially out near the mines where the loads are really really wide.
Mind you I do switch it one when travelling up to
Brisbane and it has given me a headsup of traffic problems to avoid.
FollowupID:
453364
Reply By: Member - Doug T (W.A) - Monday, Sep 18, 2006 at 23:03
Monday, Sep 18, 2006 at 23:03
Ch 29 has been the Pacific frequency for 12 years that I know of, those you heard on 27 were just having an off highway channel yap, I still can't work out why they use 29 on the coast ,but you may bet all the local
pests up and down the highway towns will on Ch29 , go to Mt Isa ....they're all on Ch40 little Bas#ards
AnswerID:
195207
Reply By: Gramps (NSW) - Monday, Sep 18, 2006 at 23:13
Monday, Sep 18, 2006 at 23:13
LOL just be thankful that the serial
pests in
Sydney that broadcast readings from the Koran have'nt taken to Ch 40 yet !!!!!
AnswerID:
195212
Follow Up By: Mike Harding - Tuesday, Sep 19, 2006 at 10:32
Tuesday, Sep 19, 2006 at 10:32
Somebody should track them down - it's not difficult to do especially with the UHF frequencies and mapping software would make it even simplier. Once found either a call to the ACA or a pin through the antennal cable will do the trick.
In my experience UHF CB is totally unusable in the cities due to the average IQ of most of the users being about 20!
Mike Harding
FollowupID:
453351