QUANSHENG UHF
Submitted: Monday, Sep 05, 2011 at 17:16
ThreadID:
88858
Views:
2308
Replies:
2
FollowUps:
2
This Thread has been Archived
John H15
G/day I,m at wits end I own a Quansheng
uhf radio modelTG45AT I can't get any response out of the manufacturers of this radio
It seem to only want to scan on 6 digit numbers instead of the 1 to 40 channels do any of you techno's know how to return it to that setting
I have had a good run with it up to now never let me down in the 4 years I have owned it I realise soon I will probably need to buy a new one to get the 80 channels eventually Ta wyatt
Reply By: Member Al (Sunshine Coast) - Monday, Sep 05, 2011 at 17:34
Monday, Sep 05, 2011 at 17:34
John,
I presume that you do not have an Operators Manual to refer to. I that is so, one for your TG45AT can be downloaded free from
here.
AnswerID:
464280
Follow Up By: Member - DingoBlue(WA) - Monday, Sep 05, 2011 at 18:57
Monday, Sep 05, 2011 at 18:57
Al,
you like Motherhen are a font of knowledge. Great that you can spare the time to give knowledgeable and professional responses to the many and varied queries from members.
Keep it up!
FollowupID:
738179
Follow Up By: Member Al (Sunshine Coast) - Monday, Sep 05, 2011 at 20:43
Monday, Sep 05, 2011 at 20:43
Nah, thanks
Dingo, but Motherhen is outa sight!! Really.
FollowupID:
738196
Reply By: Leggy - Saturday, Oct 01, 2011 at 23:32
Saturday, Oct 01, 2011 at 23:32
hi Wyatt, I'm not sure about changing from frequency readout to channel readout on your quansheng, but I am sure you won't have to update to make use of 80 channels. The current (or old) 40 channels are separated by 25KHz gaps. the new 80 channels are separated by 12.5 KHz. Your radio will almost certainly have the capability to separate down to 6.25.
The manual should show you how. Good luck.
AnswerID:
466530